Anet A8 BLV mod MGN BMG Direct Drive remix
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I took the body and cover and minimized it. You can use it with your mgn x-rail. There is no autoleveling sensor holder.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 61
- Wydruki
- 1
- Wyświetlenia
- 2014
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I took the body and cover and minimized it.
You can use it with your mgn x-rail.
There is no autoleveling sensor holder. Just the Bondtech BMG extruder.
Please use additional parts of the original Bondtech extruder carriege:
https://www.thingiverse.com/thing:3165551
You will need a fan shroud and the fan holder.
And this one:
https://www.thingiverse.com/thing:2746489
It works just fine. I already printed tons of hours with it.
Print instructions
Category: 3D Printer Extruders Summary
I took the body and cover and minimized it.
You can use it with your mgn x-rail.
There is no autoleveling sensor holder. Just the Bondtech BMG extruder.
Please use additional parts of the original Bondtech extruder carriege:
https://www.thingiverse.com/thing:3165551
You will need a fan shroud and the fan holder.
And this one:
https://www.thingiverse.com/thing:2746489
It works just fine. I already printed tons of hours with it.
Print Settings
Printer Brand: Prusa
Printer: I3 MK3S
Rafts: No
Supports: Doesn't Matter
Resolution: 0.2
Infill: 20
Filament: Nunus PETG transparent green