Don't Touch My Tools
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Funny warning sign
- Ocena
- 5 / 5
- Polubienia
- 140
- Pobrania
- 420
- Wydruki
- 6
- Wyświetlenia
- 1564
- Oceny
- 6
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Wall-mounted
- Licencja
- Creative Commons — Attribution — Share Alike
New warning sign, with 2 options, a magnet mounted option, and a thin version for cases where a magnet wouldn't work.
Again, I printed these without the use of MMU, it is just simply using the PrusaSlicer Color changing inserts, and manually changing the filament. I have added a picture of PrusaSlicer setup, showing the inserted color changes.
The new heights are for the magnetic model has an overall height of 5.6, with color changes of 3.8 & 4.7 mm.
The thin model is overall height of 4.1, with color changes at 2.3 & 3.2 mm heights. Note, becaus it is thinner, make sure it fully cools before removing from the bed to prevent warpage.
The size of the model is 120 x 100, but is easily made larger to accommodate your wants, but if you do that, I wouldn't increase the height of the model. I have pictures of most printed @ 150mm x 120mm width, but a few of the new ones are at the model default sizes. Note the magnet hole will become larger, but with CA & accelerant, works well anyways.