2020 Extrusion Mount for Malolo's Raspberry Pi 3b Case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
2020 Extrusion Mount for Malolo's Raspberry Pi 3b Case
- Ocena
- 5 / 5
- Polubienia
- 53
- Pobrania
- 253
- Wydruki
- 6
- Wyświetlenia
- 1911
- Oceny
- 6
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Wanted to mount my Raspberry Pi 3b onto my bear frame, and had it in Malolo's case.
Supports recommended except for M3 counter-bore holes.
Attach using 2ea M3 x 8 SHCS and nuts of choice.
The Open Offset has features to clear the 90 degree 2020 extrusion brackets, and stay out of the X-carriage motors movement volume of a Bear Frame set-up printer.
There should be enough thickness to change the M3 SHCS counterbores up to M4 or M5 sizing. If there are any requests for that I can upload models with those changes.
Malolo's Raspberry Pi 3b Case: https://www.printables.com/model/4038-malolos-screw-less-snap-fit-raspberry-pi-3-model-b
18.12.2022: Added BaseOffset, renamed original as OpenOffset.