1 / 34
Party glasses - 2023
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Celebrate the arrival of the new year 2023 with these funny glasses.
- Ocena
- 4,938 / 5
- Polubienia
- 49
- Pobrania
- 520
- Wydruki
- 20
- Wyświetlenia
- 2661
- Oceny
- 16
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Winter & Christmas & New Year's
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (5)Wydruki i komentarze (Wydruki: 20) (Komentarze: 25)Remiksy (1)Kolekcje (49)Powiązane
A model of funny glasses for celebrating the arrival of the new year 2023.
Printing:
Print takes a little over 2 hours and I reccomend to use color-change during print (the .3mf and gcode files are color-change ready). But of course you can go without color-change as well.
- Use PLA to bend the front part well in hot water.
- Use brim for the temples (see 3mf file).
- Custom supports are ready for the revolute joint of the temples and work well for 0,2mm layerheight.
Post processing:
- Remove temple brims and clean the edges.
- Bend the front frame a bit using hot water (or heat gun) and coffee saucer. Hot tap water was sufficient in my case. Also see the images.
- Remove small support blocks from the temples.
- Try to insert the filament into the holes. The holes will probably need to be enlarged.
- Slide the temples onto the frame and insert the filament.
- Trim the end of the filament.
- Enjoy the party ;)
Also check out:
https://www.youtube.com/channel/UChKp-968z1i5PN29gbR7YfA
https://www.cgtrader.com/rorys3d