Gopro Session 5 Cat Ears FPV Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Gopro Session facehugger style fpv mount with nd filters.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 21
- Wydruki
- 0
- Wyświetlenia
- 616
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I'm a big fan of Mr. Steele and found his foam wedge gopro mounting style to be the best. But I was always afraid that the camera was held down with the strap by the very edge. So, I designed this facehugger style mount that the contact area with the strap is significantly increased and I have more confidence in mounting my camera. It also provides slight protection for the camera. You can insert a 35x35mm glass ND filter (telesin gopro 9 nd). Mount is designed for 25-30deg camera angle.
GoPro Session / Session 5
Weight: ~6g
When using Nd filter please disable front led to prevent light leak to the camera lens.
Print Settings
Supports:
No
Resolution:
0.2
Infill:
100%
Filament:
Bestfilament PETG
Dark Gray
Notes:
The mount is designed for printing with hard filaments, preferably with PETG or ABS.
For PETG increase model size by 0.5% to compensate shrinkage.
Category: R/C Vehicles