Pico4 High FOV Open Air "Quest Pro" Style Gasket Pico 4
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Wstępna wycena dla PETG
3,11 € – 3,81 € netto (bez VAT)
Dla pliku: Proish Pico 4-38g_0.2mm_PETG_MK3S_3h50m.gcode
To wstępna wycena jednego pliku. Dokładną cenę poznasz przed zamówieniem.
Plik i założenia wyceny
Plik użyty do wyceny
Średnia wycena orientacyjna: 3,46 € netto (środek widełek).
- Masa podana przez autora
- 37 g
- Czas druku podany przez autora
- 3,88 godz.
- Materiał u źródła
- PET
- Materiał wyceny
- PETG
- Drukarka wyceny
- Bambu Lab P1S - 0.4 nozzle
- Proces wyceny
- 0.20mm Standard
Orientacyjna wycena wyłącznie wybranego pliku, oparta na masie i czasie druku podanych przez autora. Warianty plików nie są sumowane. Ostateczna cena zostanie obliczona po analizie pliku.
Zapisane na tym urządzeniu.
High FOV with a "Quest Pro" style open bottom design.
- Ocena
- 0 / 5
- Polubienia
- 23
- Pobrania
- 232
- Wydruki
- 0
- Wyświetlenia
- 2174
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Virtual Reality
- Licencja
- Creative Commons — Attribution — Share Alike
This is an adaptation of LWC's high FOV gasket, but opened up at the bottom in Quest Pro Style, This makes it easier to print, assemble and lighter weight (38g).
It is also broken into parts that have holes so you can drop magnets in between the two parts when you glue them together…
It makes it so you do not need to print with supports and you don't have to glue the magnets, just the 3 pieces together.
The magnet size is 4x10
Video Here: