Large ring mauser bolt lug lapper
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a 3d printable tool for lapping the locking lugs on a bolt for a large ring mauser. I used a 3/8" spring…
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 20
- Wydruki
- 0
- Wyświetlenia
- 248
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
This is a 3d printable tool for lapping the locking lugs on a bolt for a large ring mauser. I used a 3/8" spring 1-1/4" long. A 1/2" bolt 1/2" long is used to adjust the tension on the spring. I have included a 3d printable bolt for those who don't have access to imperial hardware. After printing the internal 1/2" thread might need to be cleaned up with a tap. The printable 1/2" bolt can also be scaled on the x and y axis to get a looser fit.
Print Settings
Supports:
No
Infill:
100%
Notes:
I printed at 0.1mm height and had no problems with the overhangs of the threads.
Category: Hand Tools