m1a1 bolt handle
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a bolt handle for a Thompson m1a1. The original model was made by Darren S on…
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 28
- Wydruki
- 0
- Wyświetlenia
- 447
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Props
- Licencja
- Creative Commons — Attribution
This is a bolt handle for a Thompson m1a1. The original model was made by Darren S on GrabCAD. https://grabcad.com/library/thompson-bolt-handle
I'm using it in an airsoft Thompson with a real deactivated bolt. The original handle fit, but was a little loose in the slot on the side of the receiver. I chose to reuse the metal knob and just 3d print the part that slid into the bolt. It screws together with a 20mm long m4 socket head cap screw.
The Fusion 360 file is included.
I also made a printable m1a1 bolt. https://www.thingiverse.com/thing:5174461
I also made an adapter to use a 1928 bolt. https://www.thingiverse.com/thing:5174463
Category: Props