Ruger MKIV grip plug
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a plug for the Ruger MKIV pellet gun frame to be able to use real grips. Both the grips and the frame will…
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 24
- Wydruki
- 0
- Wyświetlenia
- 1136
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
This is a plug for the Ruger MKIV pellet gun frame to be able to use real grips. Both the grips and the frame will need slight modifications to fit. Remove some of the wood until the grip will lay flat on the frame.
The area around the bottom screw holes needs to be cut out and the plug glued in place. The top screw holes need to be sanded flush with the frame. The left side's upper screw hole will be in the same location. Attach the grip with longer screws. Then align the bottom of the grip with the frame and mark the new hole's location. Remove the grip and drill and tap for a m4 screw. Clamp the right side grip to the frame so it is positioned similar to the left side. Mark the new holes and drill and tap.
These are the grips I used. Other grips should also work. https://www.eabco.net/Ruger-Mark-III-Grips-Walnut-Checkered-Ambidextrous-by-Majestic-Arms_p_15984.html
Print Settings
Infill:
100%
Category: Hobby