Chevrolet Truck Backup Camera Mounting Bracket
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I needed a better way to mount my aftermarket backup camera was dying that I was replacing with another aftermarket…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 30
- Wydruki
- 0
- Wyświetlenia
- 379
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Share Alike
I needed a better way to mount my aftermarket backup camera was dying that I was replacing with another aftermarket backup camera with the same dimensions. I imagine the size is pretty close on all of these cheaper chinese models that are sold by the ton on Amazon. Roughly just under an inch square. I printed it using PLA (with plans to get some black PETG in the future) at 0.2 resolution, 20% infil, brim or no brim on a Prusa MK3S.
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
Rafts:
Doesn't Matter
Supports:
No
Resolution:
.2
Infill:
15
Filament: 3d hero PLA Black
Category: Automotive