Catan resource tile storage
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Updated storage for catan resource tiles to print in groups of 5, spaced for each resource and use less filament.
- Ocena
- 5 / 5
- Polubienia
- 25
- Pobrania
- 82
- Wydruki
- 2
- Wyświetlenia
- 748
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Board Games
- Licencja
- Creative Commons — Attribution
Printed in groups of 5 (except for sea and harbor) to accommodate future seafarers expansion. the spacing was adjusted for each resource tile. The spacings are listed below. I've also included the stl of a trimmed single holder piece if my spacings don't work.
- wood/grain - 20mm
- fields - 22mm
- mountains - 32.5mm
- brick - 24mm
- sea - 9.5mm
- harbor - 26.5mm
- desert/gold - tbd
Sea tile holder is spaced for regular sea tiles (no harbor) and can hold 9. Harbor holder is set to hold 5.
Still need to measure and test prints for the rest of the resource tiles. Careful of warping on your parts, as mine were prone to warping before I dialed in my printer settings.