YAFP - Yet Another Festivus Pole
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A crafty take on the DIY Festivus Pole
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 15
- Wydruki
- 1
- Wyświetlenia
- 269
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Winter & Christmas & New Year's
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Model is a simple base for a DIY Festivus pole. The base is sized for a standard paper towel tube with a diameter of 1.75in.
For this you will need the printed base, an empty paper towel tube, a piece of 12" wide aluminum foil, some clear tape.
Step 1: Print base
Step 2: Acquire an empty paper towel tube. In my experience they are 11in long and 1.75in in diameter.
Step 3: Wrap tube with aluminum foil. A standard 12in wide foil should just over hang the top and bottom of a standard 11in long paper towel tube. For my build I thought the dull side of the foil looked better. Bonus: If you want the foil to wrap further into the tube top to hide the cardboard, trim the tube an inch or so shorter before wrapping.
Step 4: Tape the foil end along the length of the tube so it doesn't move.
Step 5: Insert Festivus pole into base.
Step 6: Commence the Festivus activities on December 23rd!
~~~~~~
After using for the 2022 season I came up with some enhancements. See v2 model!