Radiomaster TX16S MKI/MKII gimbal protection
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Wstępna wycena dla PETG
2,18 € – 2,66 € netto (bez VAT)
Dla pliku: Radiomaster_TX16S_Gimbal_protector_0.15mm_PETG_MINI_2h53m.gcode
To wstępna wycena jednego pliku. Dokładną cenę poznasz przed zamówieniem.
Plik i założenia wyceny
Plik użyty do wyceny
Średnia wycena orientacyjna: 2,42 € netto (środek widełek).
- Masa podana przez autora
- 22 g
- Czas druku podany przez autora
- 2,89 godz.
- Materiał u źródła
- PET
- Materiał wyceny
- PETG
- Drukarka wyceny
- Bambu Lab P1S - 0.4 nozzle
- Proces wyceny
- 0.20mm Standard
Orientacyjna wycena wyłącznie wybranego pliku, oparta na masie i czasie druku podanych przez autora. Warianty plików nie są sumowane. Ostateczna cena zostanie obliczona po analizie pliku.
Zapisane na tym urządzeniu.
Radiomaster TX16S MKI/MKII gimbal protection with a grip and a hole for LED charging indicator.
- Ocena
- 4,333 / 5
- Polubienia
- 19
- Pobrania
- 214
- Wydruki
- 5
- Wyświetlenia
- 998
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Gimbal protector for Radiomaster TX16S (MKI or MKII) / Jumper T16 radio (should work, not tested). Protector is from a one piece with a grip for easier removing. LED charging indicator is fully visible while the protection is on. Bigger diameter of holes for gimbals sticks offers wide compatibility.
Printing:
- PLA/PETG (recommended)
- 0,15 mm layer “Quality settings) with 0,40 mm nozzle size
- 30-40% infill (40% recommended), gyroid type
- 3 Perimeters
- Avoid Crossing Perimeters ON (to help prevent stringing)
- Support Settings:
- Generate Support Material ON
- Auto Generated Supports ON
- Overhang Threshold 35 Degrees
- Style SNUG
- Top Contact Z Distance 0.15mm
- Pattern Spacing 3mm
- Support on Build Plate Only ON
- XY Separation 75%
- Arachne perimeter generator
This is not my model; original author is mentioned in the remix page (all credits go to him!). Anyway, I uploaded it here because I have tried many printer settings and slicing options until I have found mentioned settings above which works great - support parts can be removed really easily and the whole protector is quite durable.
