White Rabbit with Quartz Clockwork
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
White Rabbit with a working Quartz Clockwork.
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 30
- Wydruki
- 1
- Wyświetlenia
- 390
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Animals
- Licencja
- Creative Commons — Attribution
When I first saw this stunning model from Reddadsteve, I directly knew this would be the perfect Clock for my apartment.
I printed all the parts of the rabbit at 150% and had no problems, with 2 exceptions:
I printed the Body_Pin at 160% except for the lenght,
and I printed the Glasses_Lenses at 145% (Clear PETG)
I redesigned the whole watch, it now can fit a Quartz clockwork (55.8x55.8x15.4mm), I took the clockwork out of a 3€ clock.
I reused some of the parts of the original watch (at 150%), those were:
-watch_rim1
-watch_rim2
-watch_face (I drilled out the hole to 6.5mm)
-numbers
One problem was that you could see the clockwork trough the thin watch_face (I used glow in the dark PLA), so i put a sheet of paper behind it.