AUDUBON SOCIETY MANSION MODEL RAILROAD HO SCALE
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The prototype for this Audubon Society mansion is based on the real structure in Strawberry CA.
- Ocena
- 4,5 / 5
- Polubienia
- 95
- Pobrania
- 417
- Wydruki
- 1
- Wyświetlenia
- 1763
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The prototype for this Audubon Society mansion is based on the real structure in Strawberry CA.
I exclusively print with PLA and have found that ordinary clear lacquer thinner (Nail polish remover) is a wonderful glue. Make a small test for yourself of two pieces of printed scrap PLA and give it a try. Let sit for 20 seconds and then try to break it apart. It leaves no residue and is applied with a small brush. I've been using lacquer thinner as a glue on stryene and PLA for years. No sloppy or messy glue to show when finished.
If you would like me to design a custom model for you contact me at: