K-Fee Kapsel Organizer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Since I couldn't find an organizer, I tried to create my own version. This is now the first try. The printing is still…
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 92
- Wydruki
- 1
- Wyświetlenia
- 650
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Since I couldn't find an organizer, I tried to create my own version.
This is now the first try. The printing is still pending, but the settings I will try first are already entered.
The organizer has a height of 215mm, that means it fits 7 capsules. I chose this height because my printer has only an area of 230x230mm. If everything fits, I will upload another version for 8 capsules, because there are always 8 capsules in the packs.
K-Fee-System -> https://www.k-fee.com
Update 2020-12-09
After the first test print I found out that my clearance between the capsules and the inner wall is too big. The capsules can turn in all directions, I fixed this and uploaded another version of the .stl files.
Update 2020-12-22
After successfully checking the dimensions of the second version, I printed and hung a few of these dispensers see photo.
I have also added an extension to the STL files, which can be made over the lower parts to store more capsules.
Print Settings
Printer:
Artillery Genius
Rafts:
No
Supports:
No
Resolution:
0.16
Infill:
20%
Filament:
Das Filament PLA
Blue Perl
Notes:
print speed: 60mm/s
infill speed: 100mm/s
wall speed: 30mm/s
travel speed: 120mm/s
Category: Kitchen & Dining