Dust Deputy adapter for Craftsman vac hose
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Love this fat hose and the DustDeputy, but struggled to make them work together til this to connect the two
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 31
- Wydruki
- 0
- Wyświetlenia
- 319
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Got a DustDeputy? Trying to use your (ancient) Craftsman vacuum and fat hose as the host for it? Hope this helps. I Had been trying to use the original inlet fitting on the body of the vacuum with hose clamps onto the dust deputy inlet, but the mismatch there caught all manner of shmutz and needed improving. This will provide a smooth transition between the fat hose and the more-narrow inlet to the cyclone to avoid catching crap there.
I tried looking for anything that met this need and there are similar adapters for different hoses, but I just started this one from scratch to make it work. Hose does retain nicely. A little hot glue on the taper of the inlet to the cyclone holds the whole thing together.
IMPORTANT: I printed this thing upside down from the CAD model and the 3mf file. You want a shelf for the feature at the end of the hose instead of an overhang. The lip on the cyclone end is much smaller and prints more nicely as an overhang.
TODO: Need to create a good adapter for the hose OUT of the deputy and into the vacuum itself…. stand by for further. The hacked up thing I originally created from PVC pipe ain't cuttin' it anymore.
FreeCAD source file provided to help facilitate remixes if you need 'em.
My print details:
3dxtech ASA on my Ender5/Zero-g Mercury one.1
0.4mm nozzle, 0.2mm layers, 4 top layers, 4 bottom layers, 4 walls, 50% adaptive cubic infill.
None of these are all that critical.