Twotrees Sapphire Plus Spool Holders
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Spool holders for Twotrees Sapphire Plus... Among other things wrong with the Twotrees Sapphire Plus, the bolts…
- Ocena
- 5 / 5
- Polubienia
- 15
- Pobrania
- 103
- Wydruki
- 0
- Wyświetlenia
- 562
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Spool holders for Twotrees Sapphire Plus...
Among other things wrong with the Twotrees Sapphire Plus, the bolts protrude from the stock spool holder, leading to some filament spools becoming caught/jammed against them...
I decided to design a couple replacements. These use the stock bolts and T-nuts to attach to the printer. The improvement is that the bolts are now recessed so they don't snag on filament spools with plastic ribs.
I should've looked around on the web before designing these. It looks like there are several good spool holders already out there probably with more thought put in... I figured I would go ahead and make these available in case someone was looking for something a bit different.
"sp5_spool_holder1" prints vertically and is a bit smoother than the other. Be sure to turn up the perimeters if you want it strong enough to take some abuse...
"sp5_spool_holder2" prints on the side, is inherently stronger and accommodates larger spools.
Enjoy!
Print Settings
Printer:
Twotrees SP-5
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
Cubic
Filament:
Duramic 3D PLA+
Blue
Category: 3D Printer Parts