Tessellation Cat
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A remix of the Low Poly Cat! by AndrewSink. I used Meshmixer to insert an Edges pattern on the low poly model as shown…
- Ocena
- 0 / 5
- Polubienia
- 23
- Pobrania
- 82
- Wydruki
- 0
- Wyświetlenia
- 534
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Animals
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A remix of the Low Poly Cat! by AndrewSink.
I used Meshmixer to insert an Edges pattern on the low poly model as shown in Maker's Muse tutorial video.
I also made a video about this entire process: https://www.youtube.com/watch?v=hJapPwgmvKE
Of note this is sized at 150% compared to the original model so that the lines aren't too thin.
Print Settings
Printer Brand:
Prusa
Printer:
i3 MK2S
Resolution:
.15
Infill:
10%
Notes:
I've successfully printed both with and without supports. I'd recommend not using them if you can since removal is far from fun. For reference, the blue model was printed without supports and the pink model was printed with supports.rnrnI recommend printing at 75%-85% speed. If you aren't using supports then a thin brim can be helpful for bed adhesion since it's hollow.
Category: Animals