Vertical Laptop Stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple A frame style vertical laptop stand with two slots and an open that fits a hub below (designed for Caldigit TS3+)
- Ocena
- 5 / 5
- Polubienia
- 18
- Pobrania
- 204
- Wydruki
- 1
- Wyświetlenia
- 1129
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Public Domain
Vertical laptop stand with two slots. One slot is 30mm and fits your average windows laptop with case, and the second slot is 20mm and works great for a Macbook Pro / Air.
The opening below was design to house a CalDigit TS3+
Tried with a Dell 17" XPS laptop in the 30mm slot and in the 20mm slot tested with a Macbook Pro Intel 15", Macbook Pro Max M1, and a Macbook Air M2. All fit without issue.
Printed in two PLA colors at 0.2mm layer height, with 25% infill. Printed orientation was with the base down on the print bed and with a support interface layer for clean bridging.