Bondtech Arrow - modified for dual fan 4010 - CR-10 Smart
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I have modified the Arrow design from Bondtech to allow the assembly of 2 x 4010 fans
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 73
- Wydruki
- 0
- Wyświetlenia
- 941
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
I have modified the Arrow design from Bondtech to allow the assembly of 2 x 4010 fans on the CR-10 Smart 3D printer.
The original design is made for the stock hotend( i have installed it on microswiss hotend without issues), and Bondtech LGX Lite extruder, so you will need this if planning to do the upgrade.
All parts printed 0.2 layer, 35% infill, 3 perimeters with supports.
Printed in PETG, sliced with superslicer on klipper format, but i guess any slicer will do.
Mechanical parts needed (taking in account also the assembly of the extruder):
- M3 x 20 screw - 2 pcs
- M3 x 10 screw - 4 pcs
- M3 square nut - 7 pcs
- M3 x 6 screw - 4 pcs
- M3x30 screw - 1 pc
- 4010 fan - 1 pc
Soldering will be needed for the wires of the two 4010 fans or other connection method.
Link for assembly of the extruder on the CR-10 Smart
https://www.bondtech.se/2022/03/07/how-to-install-the-lgx-lite-on-creality-strain-gauge-carriages/
Link for the original Bondtech Arrow assembly
https://www.bondtech.se/product/lgx-lite-arrow-for-creality/#tab-setup-guide
I reccomend checking the g-code in the link below for orientation of the parts and supports.
https://www.bondtech.se/2022/09/27/make-your-own-lgx-lite-arrow-set/
I am not taking credit for this design, I only modified it. The concept and design is Bondtech entirely.