BulletBill Pegboard Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple Pegboard Mount for BulletBill designed by Martin Moore.
- Ocena
- 0 / 5
- Polubienia
- 20
- Pobrania
- 65
- Wydruki
- 0
- Wyświetlenia
- 878
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution
A simple Pegboard Mount for BulletBill designed by Martin Moore.
I designed this around a 165% scaled BulletBill model, but have uploaded the folowing scales as well:
100%
125%
150%
165%
(Step files included for 100% and 150% for those who want to modify the model)
Note: This mount is designed for a pegboard with pitch of 25.45mm, and a hole diameter of about 6 to 6.5mm and a board thickness of about 5.5mm.
I reccomend printing with PETG as its a bit springy and not as brittle as PLA. Print at 0.2mm layer heights. Infill does not really matter, but having the arms of the mount consist of all perimeters results in a strong mount with a snug fit. (4+ perimeters used for 165% scale)