1 / 4
BabyDan No Trip Safety Gate - stopper for one-way opening — zdjęcie 1
1 / 4

BabyDan No Trip Safety Gate - stopper for one-way opening

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is a stopper to enable one-way opening on BabyDan No Trip Saftey Gates.

Ocena
0 / 5
Polubienia
3
Pobrania
40
Wydruki
0
Wyświetlenia
389
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

I'd lost the stopper to prevent the gate from opening in both directions, so I thought I'd design and print my own. Hopefully others will find this piece useful too.

I printed this as follows:

  • Material = PLA
  • Layer height = 0.2mm
  • No supports required
  • 15% infill

It may be compatible with other BabyDan models, however I've only been able to test with a No Trip Safety Gate

Tagi