Minimalistic Pegboard Plier Mounts
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple pegboard mount for spring loaded pliers of widths 12, 13, and 16mm (those are the sizes of the pliers that I…
- Ocena
- 4,5 / 5
- Polubienia
- 68
- Pobrania
- 232
- Wydruki
- 1
- Wyświetlenia
- 2738
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution
A simple pegboard mount for spring loaded pliers of widths 12, 13, and 16mm (those are the sizes of the pliers that I have lying around). Pliers easilly fit in their mounts when pressed, but when released the pliers will expand to hold on to the sides of the mount.
Mounts are included without and with a cutout for a 8x3mm disk magnet for a more secure fit.
Designed for a pegboard with a 25.45mm pitch, 6.0 to 6.5mm hole diameter and about 5.5mm thickness.
Adviced to print upright in provided orientation. A support collumn is required for the upper peg.