Drill bit box, standing upright, double hinged
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Drill bit box with two hinged covers, standing upright for easy access to the drills. With a hole to hang it on a hook.
- Ocena
- 5 / 5
- Polubienia
- 55
- Pobrania
- 429
- Wydruki
- 1
- Wyświetlenia
- 1723
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
Object description:
This is a upright standing drill bit case. The two hinged covers allow easy access to the drill bits.
A hole on the top can be used to hang the case on a hook.
A gridfinity holder is also available to store the case in a existing gridfinity system.
| The Gridfinity holder is available here: | Gridfinity holder for drill bit box |
Important notes:
I recommend PETG for the covers. This material provides the best flexibility for the lock.
Models provided are including paint on supports.
To avoid backlash, the holes of the covers are a bit too tight after printing because of the seam. A short careful manual post-processing with a 6mm drill gives best results for a backlash free fit.
Print settings:
Material: PLA, PETG, ASA/ABS.
Resolution: 0,2mm
Infill: 15%
Perimeters: 2
Brim: no
Support: for covers: yes, for base: no