_Better Cable Hanger
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Functional and aesthetic cable hanger with two slots for up to 9mm power cords. Mount using CommandStrips or screws.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 51
- Wydruki
- 0
- Wyświetlenia
- 335
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Share Alike
I couldn't find a cable hanger I liked (slots were too narrow, fingers were too long or short, or too week. So, here is a _Better Cable Hanger. It is more functional and aesthetically designed, with two slots for up to 9mm power cords.
- Fusion 360 (.f3d) file included - remix as you wish.
- Presliced gcode - you should always slice your own gcode from STLs
- One with adhesion tabs
- One without adhesion tabs
- Two STLs
- One oriented correctly
- One with the fingers lying flat (may be stronger, but if your printer and filament are dialed in, you shouldn't need the extra strength
No supports needed. Print with the fingers reaching for the sky. If your print curls away from the print bed, use a brim or a raft, or use the excellent Tab Plus plugin in Cura.
It takes effort and time to generate all the different files. If you like it, please support me by giving a like or a download. It really helps me out. Comments/suggestions/questions are even better.