1 / 5
Logitech x52 Hotas Desk Clamp
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I created this Logitech x52 Hotas Desk Clamp for my own personal use but decided to share it with others.
- Ocena
- 5 / 5
- Polubienia
- 84
- Pobrania
- 616
- Wydruki
- 0
- Wyświetlenia
- 4722
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Video Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (4)Wydruki i komentarze (Wydruki: 0) (Komentarze: 4)Remiksy (0)Kolekcje (126)Powiązane
This model is designed to fit on any desk 45mm in thickness or less.
The base plate is designed to fit both the stick and the throttle. It attaches to the base of the Hotas via the holes used for the suction cups.
The opening for the M3 nuts can be a tight fit, I typically use an M3 screw to pull the nut into the printed part as shown in pictures 4 and 5.
There is a M4 hex opening on the top to allow you to easily rotate the printed nut in the base of the Hotas.
Materials Needed
- 8 M3x16 screws
- 8 M3 Nuts
Tools Needed
- 2.5 mm hex screwdriver for 3mm bolts
- Optional 4 mm hex screwdriver for positioning and removing T-Slot Nuts
Materials to Print
- 2 Baseplates/clamps - Supports needed, at least 20% infill is recommended
- 4 Screws - No Supports, at least 20% infill is recommended
- 8 T-Slot Nuts - No Supports, 100% infill due to small size.
- The 2nd version has a larger opening for the nut on the underside.
- The 2nd version has a larger opening for the nut on the underside.