1 / 3
AirPort Express - Under Shelf Mount — zdjęcie 1
1 / 3

AirPort Express - Under Shelf Mount

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Mount an AirPort Express below a shelf on a typical open-style stereo stand.

Ocena
0 / 5
Polubienia
3
Pobrania
30
Wydruki
0
Wyświetlenia
303
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Gadgets
Licencja
Creative Commons — Attribution — Share Alike

I combined Geekdad's AirPort Express mount with a shelf adapter I made early on in my 3D printing life.

I had created a cable channel adapter to mount to the back of my stereo stand without any permanent fixtures, it uses sticky felt pads that I cut to size to grip firmly but not damage the wood (finished walnut). I bonded the two together in TinkerCAD, added a little reinforcement and some vent holes since it has top and bottom coverage now. I used Matter3D PLA+ in matte grey to print. Makes a pretty strong enclosure that holds the unit in place even with cords coming out the back.