Lenovo Tab M8 Wallmount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mount a Lenovo Tab M8 to the wall for smart home/Home Assistant control!
- Ocena
- 5 / 5
- Polubienia
- 21
- Pobrania
- 263
- Wydruki
- 1
- Wyświetlenia
- 1994
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution
This is a remix from the linked Thing on Thingiverse by McLoid.
Updated to include a camera hole for motion detection, much thinner front cover with adjusted corner blocks for a more flush fit, and slots on the bottom and left to easily pry off the cover and access the guts inside. The clip on the right has also been changed to accommodate a down-facing right-angle USB cord.
My settings:
Filament: eSun PETG (PLA works fine as well, I just ran out!)
Wallmount: 0.2mm
Cover: 0.16mm
Infill: 15%
Supports: No (There are overhangs where the clips connect, but they successfully printed for me without any support)
The above creates a nice, strong box, but enough flexibility in the cover to easily remove when needed.