Radiomaster TX16S gimbal and sticks protection NEW!
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Protect gimbals and front sticks. New version with upper stick protection! Assembly the two parts with pressure, once…
- Ocena
- 0 / 5
- Polubienia
- 29
- Pobrania
- 333
- Wydruki
- 2
- Wyświetlenia
- 1678
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution
Protect gimbals and front sticks.
New version with upper stick protection!
Assembly the two parts with pressure, once in right position the upper part rotates freely.
Insert the gimbal protection first, then rotate the other part: on the left side pull the trigger,rotate the part, push the trigger to block; on the right side the stick is momentary, so once you release it, it holds in right position the part. BEWARE the gimbal protector it's the same left and right ; you have to mirror the upper stick protector with your slicer software to obtain left and right side.
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
Rafts:
Doesn't Matter
Supports:
Doesn't Matter
Resolution:
0,24
Filament:
Esun PETG
Category: R/C Vehicles
