Mosaic Palette PTFE Fitting Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I needed to run a 3mm ptfe tube from my polybox to the palette, so I came up with this little mount.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 39
- Wydruki
- 0
- Wyświetlenia
- 720
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
I needed to run a 3mm ptfe tube from my polybox to the palette, so I came up with this little mount. use velcro so you can easily reposition as needed.
The blue capricorn ptfe tube is cut at an angle. IT DOES NOT go into the palette.
I use this PTFE fitting @ Amazon https://amzn.to/2OAA39J (Affiliate link)
Print instructions
Category: 3D Printer Accessories Summary
I needed to run a 3mm ptfe tube from my polybox to the palette, so I came up with this little mount. use velcro so you can easily reposition as needed.
The blue capricorn ptfe tube is cut at an angle. IT DOES NOT go into the palette.
I use this PTFE fitting @ Amazon https://amzn.to/2OAA39J (Affiliate link)