Bambu Lab X1/Carbon Lid Vent
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A vent for the top of the Bambu Lab X1/Carbon.
- Ocena
- 4,75 / 5
- Polubienia
- 222
- Pobrania
- 1152
- Wydruki
- 18
- Wyświetlenia
- 14 151
- Oceny
- 16
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bambu Lab Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
Dec. 2023 - Adjusted tolerances on dovetails, and split main pieces into (4) separate .3mf files.
This is a Vent for the top of the Bambu Lab X1/Carbon. Included is a Gasket to be printed in TPU (This will keep the lid from moving during printing).
The vent is to help cut down temps in the chamber (without having to completely remove the glass lid, or keep the door open), when printing with lower temperature materials, or when printing in hotter environments.
The (4) main pieces are interlocking, and will only fit 2 per plate on an X1/P1P.
The (8) gasket pieces will print all at once.
I used Spray Adhesive to keep the gasket in place, but any adhesive will save time, and keep from having to realign everything when the lid is removed.
I also recommend laying the gasket out prior to taking any final steps, as the pieces are sized according to the placement of the dovetails.
The vent will increase the height of the printer by ~35mm. So plan accordingly.
The photos are of a smaller, initial version that I printed.