Elgato Facecam Flip Cover
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A flip cover for the Elgato Facecam.
- Ocena
- 4,5 / 5
- Polubienia
- 19
- Pobrania
- 173
- Wydruki
- 3
- Wyświetlenia
- 1253
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Public Domain
This is a re-upload of the Elgato Facecam Flip Cover created by MvRens and re-uploaded here under the CC PDDC license, placing this in the public domain.
I've included a 3mf file for Prusa Slicer which includes supports and ironing for both parts. This is the Elgato_Facecam_flip_cover_sequential.3mf file. Both parts are included here, and ordered to be printed sequentially for best quality.
The original description is below.
------------------------------
Something that should've been included from the factory! This flip cover is designed to click in place of the fixed cover and does not obstruct the camera view when it's open even when fully zoomed out.
For assembly I've used a 3mm metal rod I had lying around as the hinge, although you could probably print one as well. It also accepts two 5x1mm magnets; these are optional if the hinge is not too loose or the camera isn't facing downwards.
The dimensions for the rod and magnets are contained in user parameters in the included Fusion 360 file if you want to change them! Note however that the magnet diameter dictates the size of the viewport, so you might end up obscuring the view.