Thunderbirds cookie cutters
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Thunderbirds are go! All 5 of the main Thunderbirds vehicles are here in cookie/biscuit cutter form. Printed using PLA…
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 61
- Wydruki
- 0
- Wyświetlenia
- 294
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution
Thunderbirds are go! All 5 of the main Thunderbirds vehicles are here in cookie/biscuit cutter form.
Printed using PLA in their respective colours.
I've printed these to make sure they come out OK and my Nephew helped try them in the kitchen.
Have fun with these.
Print Settings
Printer:
Malyan M180
Rafts:
No
Supports:
No
Resolution:
0.3
Infill:
20% but doesn't really matter
Notes:
The thinnest walls should be 1.2mm, If the parts print with gaps then either reprint with additional perimeter shells or soften the part with a brief lighter flame etc and pinch the shells together.
I created these by tracing around 2D drawings. Adding the numbers and other details slightly shallower than the outline so they should indent into the dough/mix.
Category: Kitchen & Dining