Unicorn Sun Catcher
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The Frame is printed in clear for the first 0.5mm then with black from for the next 1mm.
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 41
- Wydruki
- 0
- Wyświetlenia
- 430
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- 2D Plates & Logos
- Licencja
- Creative Commons — Attribution
The Frame is printed in clear for the first 0.5mm then with black from for the next 1mm.
I printed the horn in solid white and the other colours in translucent colours. If you don't have those you could try solid colours but half the thickness, not sure if that would work though.
I've given the coloured bits a 0.1mm clearance all around, this should be sufficient for almost all printers / filaments.
Print instructions
Unassociated tags: wall art
Category: 2D Art Summary
The Frame is printed in clear for the first 0.5mm then with black from for the next 1mm.
I printed the horn in solid white and the other colours in translucent colours. If you don't have those you could try solid colours but half the thickness, not sure if that would work though.
I've given the coloured bits a 0.1mm clearance all around, this should be sufficient for almost all printers / filaments.