Grappling Hook
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I wanted a lightweight hook I could take along kayaking that could easily snag a drifting boat. I also wanted…
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 23
- Wydruki
- 0
- Wyświetlenia
- 274
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Share Alike
I wanted a lightweight hook I could take along kayaking that could easily snag a drifting boat. I also wanted something that could use to lift outdoor furniture from ground level to a second-floor deck without carrying it through the house. There are probably many other uses.
UPDATE Version 2 (19 Jul. 2017):
In the original version the tines on hook are brittle when printed in PLA. Version 2 replaces those tines with #6 screws.
The hook attachment is sized for a 1/4-20 eye bolt. One nut is counter sunk in the bottom and the other nut and a toothed washer are tightened from the top to make it solid. Printed in PLA with 25% infill is sufficiently strong for my needs, but I'm not planning on tossing it on concrete.
Disclaimer: No testing has been done to establish a load limit. Do your own testing before relying on a print of this hook. Using this to climb buildings like in the original Batman TV series is particularly discouraged, but if you try it and live, please let me know.
Print Settings
Printer:
D-Bot CoreXY
Rafts:
No
Supports:
No
Resolution:
.2
Infill:
25%
Notes:
I printed this with a brim to keep the thin legs from curling.
Category: Sport & Outdoors