Sliding Door Latch Male
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A clip-on latch mechanism for sliding doors to ensure that they stay closed.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 17
- Wydruki
- 0
- Wyświetlenia
- 316
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial
I remixed the male portion of Lucas's Window Holder to solve a problem I had with my sliding doors. My sliding doors would often never stay fully closed in my office and with this 3d print I was able to solve the problem.
The sliding door latch male 3d print can be clipped on to the metal hanging mechanism for my sliding door, requiring no modifications to my doors. It has stayed attached for the last couple of months and I have perceived no changes to its function over that time.
Be sure to get the female portion of the latch from Lucas's Window Holder if you are going to make this print. I am unsure how useful this print will be for most people, as I do not know how standard sliding doors are, and I presume that you may need to modify the STL for the exact length from the edge of your sliding door to the metal hanger holding the door to the rails.
As for my print settings:
| Material | PLA |
| Infill | 30% |
| Supports | Yes |