Keyring Holder for Brooks Pocket Auto Catch
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A model to put my Pokemon Go autocatcher on a keyring, since I didn't quite like the original strap.
- Ocena
- 4,667 / 5
- Polubienia
- 14
- Pobrania
- 161
- Wydruki
- 8
- Wyświetlenia
- 619
- Oceny
- 6
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial
Although the Pocket Auto Catch comes with a wrist strap, I didn't quite like it, and a friend of mine had his break, so I decided to CAD up a model that could be put on a carabiner or other keyring holder so that I wouldn't need to wear something on my wrist.
This model does require supports, especially for the overhang on the Mainbody model.
Instructions
Material: PETG, PLA, ASA
Infill: 10%, Cubic
Supports: Mandatory for Mainbody.stl; uncheck “Build Plate Only”
Note: It may be a little bit of a tight fit for your device, but it should pop out with a few taps on the back of the Insert; failing that, you should be able to lever it out by pressing on one of the long edges of your device.