Kitty Litter Pooper Scooper
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a kitty litter pooper scooper I designed to be easy to print (very minimal supports needed). It's a two part…
- Ocena
- 5 / 5
- Polubienia
- 12
- Pobrania
- 127
- Wydruki
- 2
- Wyświetlenia
- 608
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Pets
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a kitty litter pooper scooper I designed to be easy to print (very minimal supports needed). It's a two part construction. The handle screws in to the scoop. You can probably print this without supports at all. The only area of concern for supports are the curved sides of the scoop. I have printed it without supports but your printer has to be tuned well.
The holes are 4mm wide, which seems to perform well and is common on commercially available scoops.
Please post your comments and makes.
Print Settings
Printer:
Hatchbox Alpha
Supports:
Yes
Resolution:
0.20mm
Infill:
33%
Notes:
If you decide to print this with supports, please ensure that no supports are generated in the screw threads. In Simplify3D, I had to use the support tool to remove the automatically generated supports that were generated in the scoop threads.
Category: Pets