Racecar Spinner
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a race-car fidget Spinner I designed. It is designed to be on the smaller side so it should fit in kids hands,…
- Ocena
- 5 / 5
- Polubienia
- 4
- Pobrania
- 37
- Wydruki
- 1
- Wyświetlenia
- 279
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Toys
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a race-car fidget Spinner I designed. It is designed to be on the smaller side so it should fit in kids hands, but adults can play with it too!
This requires 608ZZ bearings.
The bearing covers also have a small lip to prevent the covers from accidentally touching the bearing and slowing it down. You can squeeze these covers firmly without deforming them and slowing the bearings.
Use my Spinner Press to help insert the bearings. http://www.thingiverse.com/thing:2275122
Print Settings
Printer:
Hatchbox Alpha
Rafts:
No
Supports:
No
Resolution:
0.20mm
Infill:
20%
Category: Toy & Game Accessories