Freestanding filament spool roller V2
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a remix of http://www.thingiverse.com/thing:1070481 REQUIRED, 4 x 608ZZ type bearings I made a few changes.…
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 41
- Wydruki
- 0
- Wyświetlenia
- 267
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
This is a remix of http://www.thingiverse.com/thing:1070481
REQUIRED, 4 x 608ZZ type bearings
I made a few changes. First, I added legs for free standing use. I made some visual design changes and I changed the rollers. The rollers now have a 5mm seat for the bearings so they won't go too far in.
The bearings are a tight fit on to the posts. Also, the rollers are a tight fit on to the bearings. A little sand paper made everything slip on but still maintained the snug fit I was looking for (I didn't want it falling apart with a larger/heavier roll on it).
See my clip-on filament guide for the FLUX Delta here http://www.thingiverse.com/thing:1588795
Print Settings
Printer:
FLUX 3D Delta
Rafts:
No
Supports:
No
Resolution:
0.3mm
Infill:
20%
Notes:
I printed mine at 220c. That's just what my printer happens to like with the filament I use.
Category: 3D Printer Accessories