Milwaukee Packout Crossbones Latch
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Do you use Milwaukee's Packout System for your doggo? Here's a neat latch to easily identify it in the stack.
- Ocena
- 0 / 5
- Polubienia
- 35
- Pobrania
- 107
- Wydruki
- 0
- Wyświetlenia
- 1006
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Do you use the Milwaukee Packout System for your furry friends (not actual furries - oh god, what have I done)? Do you hate digging through the stack of packout gear searching for which one holds the correct tools? Look no further!
I originally made this latch for my uncle who's nickname is T-Bones and figured someone might get some use out of it so here it is.
Version 1 prints in one piece and allows for a manual filament swap with a pause or a color swap via your slicer.
v2: If you prefer printing your logo / emblem / inlay in another color but don't trust or don't want to swap filament manually, print this one and the inlays separately. I don't use an MMU and even after swapping filament found that the small print area for the emblem meant an ugly finish when color 1 and color 2 would blend slightly for a bit.
I recommend printing in PETG or stronger. I imagine if left in a hot truck PLA could potentially deform on a hot day.
I use 25% infill w/ 4 perimeters. If your machine is tuned you should not need to scale down the inserts. If not scale down slightly.
Needs supports.