Micro Swiss Direct Drive v2 Hydra Front Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Update 2022-02-13: Now there are all mounting holes available and I changed the round edge (original) to a corner for…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 161
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
Update 2022-02-13: Now there are all mounting holes available and I changed the round edge (original) to a corner for a little bit more material at the outside. The new files are named v2.0_xxxxx and fit for V1 and V2 of the Microswiss DirectDrive (for Ender3 and CR-10). The mesh errors are still in it. I did not print version2 -> no real pictures, sorry.
I used the original remix of Akanar for a while. It fits really good :)
Like often there is a "but". Akanar designed the remix for Microswiss DirectDrive "first version / generation". Thanks to madbuda (who provided files for the old and the new version) I was able to remix the "Front_Base.stl" to fit it for the carriers second generation.
So, what are the differences?
- Added three holes. Now nearly every threaded hole of the carrier can be used to mount the front base.
- Removed the upper hole (but added it with v2.0 again) and nut holder. In my very personal opinion the orginal idea was clever but missed the fact that the thread of the carrier and the thread of the nut have to match. (Should have left just the hole... Now the screw that holds the rear base has to have a very exact length which is no problem for me since I chop all my screws to match the requirements.)
- Mesh errors. Lots of mesh errors. With Cura it is sliceable and printable but throws a warning. There are holes and gaps and doubled walls and stuff like that because I am to stupid to work with Fusion360 :( Maybe this might be fixed in the future or a more intelligent person grabs Akanars provided source and does what I was not able to do. Having nearly no experience with mesh repair I tried MeshMixer and some online tools but the results were not as good as expected.
As always I provide the files for SketchUp. So everyone can do remixes and improvements.
Usually I would not put quality like that online. Please understand th WIP flag as "it works but the designer did a horrible job".
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
25
Filament: 3DJake ecoPLA Black
Category: 3D Printer Parts