Satisfye gaming grip wall mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I made this in fusion360 because there was no were to put it so I put it on the wall I hope you like it infill 5%
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 295
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Noncommercial
I made this in fusion.360 because there was no where to put it so I put it on the wall I hope you like it
infill 5%
one shell
supports-no
time ruffle 2hours.30 minutes
I would orient the model so that it prints so theirs no over hangs.
I used 3.30 mm screws hope this helps thanks for downloading my model
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
Rafts:
Doesn't Matter
Supports:
No
Resolution:
200
Infill:
5
Filament: PolyMaker pla Post-Printing =============
I used 3.30 mm screws hope this helps( I used command strips to hang it up works great)
How I Designed This
I made this in fusion 360
Category: Organization