Weihnachtsbaum-Spitze für kurz Entschlossene
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Christmas tree top Last minute
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 174
- Wydruki
- 0
- Wyświetlenia
- 793
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Winter & Christmas & New Year's
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Weihnachtsbaum-Spitze für kurz Entschlossene.
Diese Weihnachts-Baum-Spitze sollte in 100% oder Vasen-Modus gedruckt werden.
Gemacht für Drucker mit 0.4 mm Düse.
Schicht Höhe empfehle ich 0,2-0,3 mm.
Material was Ihr so da habt PLA, ABS, PETG, PC oder ähnlich, hier kommt es wohl er auf die Farbe an Wahrscheinlich Gold, Silber, Rot oder Weis.
Abmessungen ca.: 160 mm hoch, untere Kugel ca. D=60 mm und die Öffnung unten 30 mm.
Viel Spaß und ein frohes Fest :-)
--------------------------------------------------------------------------------
Google translates:
Christmas tree lace for the short-term
This Christmas Tree Top should be printed in 100% or vase mode.
Made for printers with 0.4 mm nozzle.
Layer height I recommend 0.2-0.3 mm.
Material what you have there PLA, ABS, PETG, PC or similar, here it depends on the color Probably gold, silver,
red or white.
Dimensions approx.: 160 mm high, lower sphere approx. D=60 mm and the opening below 30 mm.
Have fun and happy holidays :-)