212cc air filter adapter for PCV and air trim valve
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I used the design from https://www.thingiverse.com/thing:3085098 (thanks jeffreyheaden) I added to the design by…
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 81
- Wydruki
- 0
- Wyświetlenia
- 564
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution
I used the design from https://www.thingiverse.com/thing:3085098 (thanks jeffreyheaden) I added to the design by making a back plate that I glued to the air filter adapter.
I included a hose adapter for the PCV from the head. I think that it makes it look super clean and keeps crap out of the engine. I also made a cover for the Air/Fuel trim valve so it doesn't fall off when you are riding around.
I printed both with 100% infill ABS I had to drill out the holes for where it mounts to the carb. I used 1/4 drill bit for that and it fit perfect.
feel free to modify this more, it is pretty basic as I am not very experienced with 3d design but it is functional.
I will update after I have used this to see how it handles heat and vibrations.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3 Pro
Rafts:
No
Supports:
No
Resolution:
.20
Infill:
100
Filament: hatchbox abs black
Notes:
I used a brim to print this. may not have needed it. but I find it helps with warping.
Category: Automotive
