1 / 2
Grips for GPD Win Max 2 by Qaz with metal hinge and magnet — zdjęcie 1
1 / 2

Grips for GPD Win Max 2 by Qaz with metal hinge and magnet

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Grips for GPD Win Max 2 by Qaz with metal hinge and magnet

Ocena
5 / 5
Polubienia
23
Pobrania
259
Wydruki
2
Wyświetlenia
1900
Oceny
2

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Computers
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Tried most grips that are available for 3d print, but this is the one I like the most. (Thanks Qaz!) Like the quick release and no bulky tray to hold the laptop. But not a big fan of the loose hinge. So I moded it to use M3 screw as a hinge and added magnets to hold the feet in place.

Tip: apply cloth/gaff tape on the inner side of the grips to have a more snug fit, also prevent scratches.

Only moded the left side, just flip the model in slicer for the right side.


BOM for a pair of grips
ISO 4762 / DIN 912 M3x16mm - 2pcs
M3 Nyloc Nut - 2pcs
Round 6mm X 3mm Magnet - 4pcs
Superglue for magnet