1 / 6
Stand for Vit Sport filament connector (splicer)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Stand for Vit Sport filament connector to fix splicer on table and parts of filament when work.
- Ocena
- 5 / 5
- Polubienia
- 73
- Pobrania
- 530
- Wydruki
- 5
- Wyświetlenia
- 3982
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (4)Wydruki i komentarze (Wydruki: 5) (Komentarze: 13)Remiksy (3)Kolekcje (96)Powiązane
I was inspired by https://www.thingiverse.com/thing:5233832 .
However I decided to draw my own model because:
- I have different magnets
- I like rounded shapes
- I want to have possibility to press it only from the top
- I want more precision filament fit
Here is the result. In my print I also attached resin pad to bottom side.
Where to buy:
How it's printed:
- Filament: PETG for caps and stand + TPU95 for pad
- Quality : 0.1 mm
- Support: yes
Additional materials:
- 4 magnets 10x2.8 mm.
If you need for different magnets, just let me know.