1 / 4
Thermomix "Teigretter" (dough saviour) for TM5/TM6 (Teiglöser, Teigblume) — zdjęcie 1
1 / 4

Thermomix "Teigretter" (dough saviour) for TM5/TM6 (Teiglöser, Teigblume)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Orientacyjna cena wydruku pliku

3,56 € – 4,35 € netto (bez VAT)

Dla pliku: gcode for Mini+ PLA .2mm quality / thermomix20teigretter_02mm_pla_mini_4h7m.gcode

To wstępna wycena jednego pliku. Dokładną cenę poznasz przed zamówieniem.

Plik i założenia wyceny

Plik użyty do wyceny

Średnia wycena orientacyjna: 3,95 € netto (środek widełek).

Masa podana przez autora
46 g
Czas druku podany przez autora
4,12 godz.
Materiał u źródła
PLA
Materiał wyceny
PLA
Drukarka wyceny
Bambu Lab P1S - 0.4 nozzle
Proces wyceny
0.20mm Standard

Orientacyjna wycena wyłącznie wybranego pliku, oparta na masie i czasie druku podanych przez autora. Warianty plików nie są sumowane. Ostateczna cena zostanie obliczona po analizie pliku.

Zapisane na tym urządzeniu.

"Teigretter" for easier dough removal on the Vorwerk Thermomix TM5/TM6. Will allow you to spin the blades manually.

Ocena
5 / 5
Polubienia
20
Pobrania
370
Wydruki
9
Wyświetlenia
3191
Oceny
5

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Kitchen
Licencja
Creative Commons — Attribution

My Thermomix "Teigretter" helps for easier dough removal on the Vorwerk Thermomix TM5/TM6. It is loosely based on the “Teigling” model made by DonBorste but completely drawn by myself - see https://www.printables.com/model/118743-thermomix-teigling-tm5-tm6 for the model inspirations. I selected this style of Thermomix utility as the model by DonBorste was simply the best available but I wanted to optimise how well it fit into the Thermomix, so it won't fell off.

 

Printing instructions (or maybe printing hints):

I recommend printing the upper “flower” using 100% infill. See screenshot for how I added a cylinder modifier to accomplish this. Otherwise I am using just 15% infill with 3 perimeters and everything seems to hold together just fine.

Ironing the upper most layer makes a lot of sense.

Best printed on a Textured PEI sheet.

Tagi