Square Vase 12x12cm with tank
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Here is a design i love to use for growing Basil. Thanks to the tank of water at the bottom the ground stays wet.
- Ocena
- 4 / 5
- Polubienia
- 14
- Pobrania
- 159
- Wydruki
- 0
- Wyświetlenia
- 1142
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution
Here is a design i love to use for growing Basil. Thanks to the tank of water at the bottom the ground stays wet. I sometimes use Urtica as a fertilizer (1kg in 10l water for 14 days then diluted 10%).
Seems to grow really well.
I have got the idea after looking to :
(
http://www.thingiverse.com/thing:3202271
) by hitchhiker4200
(
https://www.thingiverse.com/thing:2335087
) by Crazyfire917
You can modify mine using the link :
https://a360.co/2Y5rmtW
I sometime put text which is sticking out of 0.2mm from the outer surface when i make gift, then i can still use same printing parameters.
Happy printing
I also posted on Thingiverse
https://www.thingiverse.com/thing:4462729
Print instructions
For the outside i used prusa 0.2mm quality settings with :
first layer 0.3mm
3 perimeters
joint : random
infill : 0%
extrusion multiplier : 1.05
For the inside 0.2mm quality settings with :
first layer 0.3mm
2 perimeters
5% infill
no loop
brim 5mm